Applying a ceramic coating over a paint protection film can enhance its durability, hydrophobic properties, and overall appearance. IGL Coatings’ Ecocoat Shield is a graphene-infused ceramic coating designed to provide maximum PPF protection while being low VOC and easy to apply.

In this guide, we’ll walk you through the step-by-step process of applying Ecocoat Shield over PPF to ensure thorough luxury car protection in 2025.

Why Choose Ecocoat Shield for Paint Protection Film US?

Benefits of Applying Ceramic Coating Over Auto Protection Film US

• Enhanced Hydrophobic Effect – Water, dirt, and contaminants slide off easily.
• Extended PPF Lifespan – Adds a protective layer against oxidation and UV damage.
• Improved Gloss and Clarity – Maintains the aesthetic appeal of your vehicle.
• Easier Maintenance – Reduces the frequency of washes and protects against stains.
• High-Temperature Resistance – Suitable for various climates.

Step-by-Step Application of Ecocoat Shield on PPF

Step 1: Preparation and Surface Cleaning

Before applying Ecocoat Shield, the surface must be thoroughly cleaned.

Cleaning the Surface:

• Ensure application temperature is between 20-26°C (68-78.8°F) for optimal results.
• Wash the surface with Ecoclean Wash to remove dirt, grease, and contaminants.
• Use Ecoclean Iron to remove iron particles and fallout.
• Dry the surface completely before proceeding.
• Degrease with Ecoclean Precoat to ensure a reactive and clean surface.
• Use an IGL Microfiber Cloth to dry and remove any remaining residue.

Tip: Avoid direct sunlight and hot surfaces during cleaning and application.

Step 2: Application of Ecocoat Shield on Best PPF for Cars

Now that the surface is clean and ready, it is time to apply Ecocoat Shield.

How to Apply:

1. Shake the bottle well before use.
2. Apply a few drops of Ecocoat Shield onto the provided application cloth.
3. Work in a 3×3 ft section – Apply in a vertical motion, followed by a horizontal motion for full coverage.
4. Ensure overlapping strokes to avoid missing spots.
5. Wait for 0.5-2 minutes until a slight resistance in buffing is felt.
6. Buff off the coating with a clean, dry IGL Microfiber Cloth.

Important: Do not allow the coating to dry sporadically. If this happens, reapply a small amount of Ecocoat Shield and buff immediately.

Step 3: Curing and Layering for Long-Lasting Car Paint Protection US

To achieve maximum durability, proper curing is crucial.

Curing Time Options:

• 2 hours at 5-50°C (41-122°F)
• 1 hour at 60°C (140°F)
• 15 minutes (infrared short wave)
• 15-20 minutes (infrared medium wave)

Note: The longest interlayer duration is 12 hours. If adding a second layer, apply within this timeframe for best bonding.

Final Curing:

• The coating fully cures in 3-5 days.
• Avoid using harsh shampoos, strong chemicals, or caustic cleaners during this period.
• Use only pH 3-9 neutral cleaners for maintenance.
• Avoid water contact for at least 4 hours post-application.

PPF Maintenance Tips for Auto Protection Film US

To keep your Ecocoat Shield ceramic coating in top shape, follow these maintenance tips:

• Wash with pH-neutral shampoo (avoid acidic or highly alkaline products).
• Use a microfiber wash mitt to prevent scratches.
• Avoid automatic car washes with harsh brushes.
• Perform routine inspections to maintain hydrophobic performance.
• Reapply after 12 months if needed for continuous protection.

Final Thoughts on Car Paint Protection US and Paint Protection Film US

Applying Ecocoat Shield over Paint Protection Film US is an effective solution for car paint protection US. With proper surface preparation, precise application, and correct curing, your best PPF for cars can have enhanced durability, a stunning gloss finish, and exceptional hydrophobic properties for years to come.

For those looking for luxury car protection, following this guide will ensure a spotless, high-gloss, and long-lasting finish with IGL Coatings Ecocoat Shield.

Most Recommended IGL Coating: Ceramic Coating for PPF in US [2025]

Applying a high-quality ceramic coating specifically designed for Paint Protection Film (PPF) is essential for maximizing its longevity and performance. IGL Coatings offers a range of ceramic coating products that are ideal for protecting PPF:

Ecocoat Shield

Ecocoat Shield for PPF

Ecocoat Shield is a graphene-reinforced ceramic coating specifically formulated for paint protection films (PPF), flexible thermoplastics, matte and gloss PPF, polyurethane (PU), vinyl wraps, self-healing PPF, and other flexible plastics. Its advanced formulation offers enhanced protection and durability for these surfaces.

Key Features and Benefits:

• Enhanced Slickness and Gloss: Ecocoat Shield boosts surface smoothness, resulting in heightened gloss and an ultra-slick finish.
  
• Improved Hydrophobic Properties: The graphene-reinforced formula enhances water-repelling capabilities, ensuring superior water beading and preventing water spots.
  
• Easy Application and Maintenance: Designed for user-friendly application and straightforward maintenance, making it accessible for all levels of users.
  
• Increased Compatibility with PPF: Formulated to ensure a higher compatibility rate with various types of paint protection films, allowing for seamless integration.
  
• Enhanced Water Spot Resistance: The improved formula reduces water spotting, maintaining the pristine appearance of coated surfaces.
  
• Durability of Up to 24 Months: Provides long-lasting protection, ensuring peace of mind and sustained performance.

Selecting the right ceramic coating depends on your protection goals, location, and usage habits. Consulting with an authorized IGL Coatings installer ensures optimal results and long-lasting PPF performance.

About IGL Coatings

IGL Coatings has rapidly ascended to become a leading name in the automotive detailing industry in the US since our establishment in 2015. Originating from Malaysia, we have achieved international acclaim for our innovative surface protection solutions, which emphasize sustainability and advanced technology. IGL Coatings is renowned for our commitment to research and development, creating high-performance coatings that offer exceptional durability and enhanced aesthetics. 

Our global reach extends to over 50 countries, where we support a network of more than 5,000 micro-entrepreneurs. This global presence is bolstered by strategic partnerships and a robust distribution network, which has facilitated our recognition as the highest growth manufacturer in Malaysia and one of the top 500 high-growth companies in the Asia Pacific.

IGL Coatings: Industry Recognition

Our dedication to quality and innovation has also been recognized through various awards, including the prestigious SEMA Media Award and the International Detailing Association’s Detail Supplier of the Year award. 

These accolades reflect our commitment to excellence and our role as a leader in the industry. Our continuous innovation and adherence to high standards have made us a trusted name among professionals and enthusiasts worldwide​.

Follow us on social media:

Facebook | LinkedIn | Instagram | Twitter | YouTube | TikTok